Product Spotlight: Extreme Hold

This post is also available in: Tiếng Việt

We are very excited to introduce one of our great new products: Extreme Hold.

Twenty years ago, we came up with Ultra Hold, an extremely affordable acrylic liquid glue that worked well and saved stylists money.  Today we feel that same breakthrough has happened on the silicone side. After years of research, development, and testing, we nailed it with Extreme Hold.

Extreme Hold will exceed all your silicone adhesive expectations. And, like Ultra Hold, it’s being delivered at a more affordable price than the competition. Our goal was to come out with the best silicone adhesive on the market and save our customers money. We’ve truly done that with Extreme Hold.

Extreme Hold is medically tested skin safe and will give at least four weeks of hold. However, depending on climate, humidity, and body oils, it can last up to six weeks. It works well on all types of units. Tested against the best silicone competition out there, our new Extreme Hold shined.  It became clear, very quickly, that Extreme Hold is a winner.

Extreme Hold is very easy to work with and is less stringy than many maximum wear adhesives. We also developed a 4oz squeeze bottle, so our most popular size even easier to work with. The precision tip on the squeeze bottle enables you to get just the right amount of adhesive. Now let’s talk about how to apply Extreme Hold to get the best results.

Before application, wash your client’s scalp with Bond Breaker shampoo to clean and gently exfoliate. Next, prepare your client’s scalp with 99% alcohol. Then, apply two thin layers of Extreme Hold using one of our Sponge Brushes. Keep in mind that when it comes to applying liquid adhesives, more is not better. If your layers are too thick, your hold times will be compromised. After you’ve applied the second thin layer, blow dry the Extreme Hold until it’s very tacky to the touch. Then, you’re ready to install the unit. Be sure to press it firmly onto the scalp. Let’s recap:

How to Use Extreme Hold Adhesive:

Step 1: Clean your client’s scalp with Bond Breaker shampoo.

Step 2: Prepare the scalp with 99% alcohol to remove oils and increase hold time.

Step 3: Apply two thin layers of Extreme Hold.

Step 4: Blow dry until tacky to the touch.

Step 5: Place the unit and press it firmly onto the scalp.

Things to remember:

  • Extreme Hold is a silicone adhesive
  • It’s easy to work with during installation and removal
  • It’s medically tested skin safe
  • It’s less stringy than many maximum wear adhesives
  • It meets all current EU regulations

Available Sizes:

  • Brush-on .5 oz
  • Brush-on 1.4 oz
  • Squeeze Bottle 4 oz
  • Pint (16 oz)

Other Products We Recommend:

Preparation

Bond Breaker should always be the first step in preparing for an install. Bond Breaker Shampoo breaks down the adhesives, scrubs the skin, and cleans the hair in one step.

Removal

Our Signature Remover is incredibly gentle and skin friendly with a pleasant, mild citrus scent. A quick wash with mild soap and water after unit removal leaves you with a perfectly clean scalp and unit.

Extreme Hold can be purchased in our online store or through our customer service department by verified wholesale customers. If you’re not a wholesale customer yet, what are you waiting for? Sign up here to get access to the best products on the market at wholesale prices.

Leave a Reply